|
Payphone information - Part 2
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
This file is for Entertainment purposes only.
The authors of this file take no responsibility for any of its contents.
Well our mail boxes having been filling up with questions regarding this
series. We will answer them all in future files.
Ok, now you have your payphone home. What do you do with it. While, if you
want to make it work, you need to run up a five prong cable from the phone
line in your basement. The outlet in the wall won't work. Now, a two inch
hole at the left front of it. Remove the back panel (as described in part 1)
and disconnect the wires coming out of it. You will see them coming from
silver screws. Disconnect them all. Now make sure you know which screws they
came from.
Now for some explaining. You could just wire it up with the existing wires,
but then it will make tones, so we are going to rewire it.
You will need 10 heavy duty 7 inch wires for the next part.
If you don't want it to accept money, skip this part.
Take the 12 O'clock screw and connect it to the screw at the bottom of the
totalizer. You will have to push it through, then take the top off, and
connect it. Connect the 2 O'clock screw to the green wire on the silver box.
Just cut the green wire from the box and connect them.
Ok, now this is the part that makes them work. Take the silver box which is
hanging loose now (make sure the wires attached already don't come loose), and
attach your 10 wires to the screws on the phone. Now starting at the left top
of the silver box, hook the wires on counter clockwise starting with 3
O'clock, excluding 12, 2, 2:30, and 4.
Now run the cable up through the bottom, and hook it to the front of the
silver box. It should now work.
Ok, now to answer a question. A MAD! reader wants to know if you could trip
the totalizer using a wire stuck up the coin slot.
MR. C0SMOS answers that it would be very hard because of the bends involved,
and metal in the way. You might be able to if you used a non-magnetic, very
small, bendable rod. Just keep going up, intill you encounter a small lever,
then move it. It would take alot of patience.
Watch for part 4 soon.
The Lunatic Phringe BBS
312-965-3677 300/1200 Baud
|
|
