|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
|
Payphone information - Part 1
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
The things presented in this file is presented for entertainment purposes
only. The authors of this file take no responsibility for any of its
contents.
Section 1:how to open a payphone
An Atlantic Bell payphone is a heavily armored device. It is designed to
withstand attempted theft and damage. But as we found out in part 1, we don't
need to get through all the armor to phreak it. All we need to do is get to
the wiring which is all located behind 3 easy to remove panels.
All that holds the front panel on is 3 or 4 bolts. Just apply sulfuric acid
and in ten minutes or less they will come right out. While you are waiting
remove the other panels. The top panel is held on by two tight nuts. A good
pair of pliars will remove them. Now the back panel is the hardest to remove.
It is held together by a semi-permanent solution. On the newer AT&T credit
and pay phones, an alarm goes off when the back panel is removed. The
circuitry for it is located in the top panel. Look for a round box with 4
wires coming out. Cut the first and second ones. Now use sulfuric acid, wait
ten minutes and lift it off.
Section 2:How to steal a payphone
Ever wanted to have your own payphone. Its not very hard to steal one. As a
matter of fact, it is easy to rip one out of the wall, but I want to show you
how to take one home intact. Anyone traveling to Toronto should stop by to
see MR. C0SMOS' collection of payphones. He has them set up and working.
Stealing payphones is very dangerous. Much more than phone boxing. Do not
steal more than one from an area. They sometimes know immediatly when its
gone, so get the hell out of there. The inside of it is heavily armored. If
you are taking it for the money, you will need a full set of philips &
flathead screwdrivers, sulfuric acid, a crowbar, a sledgehammer, bolt cutters,
and probably more. Now you can take it home and pound on it, or you can use
the easy way we showed you in part one.
In part 3 we will show you how to wire it up when you get it home and alot of
other stuff.
The Lunatic Phringe BBS
312-965-3677 300/1200 Baud
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.
totse.com certificate signatures
|
|
|
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
|
|
|
|
|
|
