|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
|
Clear boxing
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
CLEAR BOXING
The idea for the Clear box comes from an article in the newsletter 2600.
The clear box works on 'post pay' coin phones, pay phones that require money
only after the connection has been made. The way this works is: After the
connection is made the mouthpiece of the phone is muted but not the earpiece,
free calls to dial-it services can be made with these phones.
In order to talk to the person you called without paying (NOTE: It is
against the law to do this!!) Take yourself down to your nearby electronics
store and get a four transistor amplifier and a telephone suction cup inductive
pick-up. Put the pick-up on the earpiece and plug it into the output of the
amplifier, and plug a microphone into the input. You then talk into your
microphone and listen normally through the earpiece.
Radio Shack sells an item that wont need much modification,and that
should work the same as the above construction. It is their 'Portable snap-on
handset amplifier' (Part # 43-238) Their description says to put it on the
earpiece and it will boost the callers voice to five times the normal level.
In order to make this function like a clear box one would have to take the
amplifier apart and remove the internal speaker, in it's place, connect the
suction cup inductive pickup. Place the pick-up (which is now the speaker)
to the earpiece of the payphone, and talk into the microphone of the amplifer.
The line will not cut off, and will wait forever for you to put the coins in.
Note also that these types of payphones are not connected to the TSPS in
the same way as normal payphones. The phone does all the charging and not
the Central Office. It is because of this, that a phone connected to the
lines BEFORE the payphone would act just like a normal phone. So get out
your smallest phone, cut off the jack and strip the wires. connect the wires to
two alligator clips. Then you can clip onto the payphone's wires BEFORE they
connect to the payphone, you then have a normal telephone line that you dont
pay the bills on!
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.
totse.com certificate signatures
|
|
|
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
|
|
|
|
|
|
