|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
|
How to build many different phreaker boxes
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
%"""""""""""""""""""""""""""""""""""""%
" -A GUIDE TO MAKING VARIOUS BOXES 2- "
" =-------------------------------= "
" "
" COMPILED BY THE LOCKSMITH "
" =-----------------------= "
" "
" CALL THESE RADICAL BOARDS "
" =-----------------------= "
" "
" THE HACKER'S HIDEOUT.(206) 256-6369 "
" THE HEART OF GOLD....(604) 721-0693 "
" THE PROVING GROUNDS..(604) 478-1364 "
" "
%"""""""""""""""""""""""""""""""""""""%
FIRST OF ALL, I GIVE MY THANX TO MAD MAX FOR HIS SUPPORT. OTHER THANX GOES TO:
MYSTIC WARRIOR
BLACK LAB
AND OF COURSE EVERYBODY'S FAVORITE PERSON JASON ANDERSON, ALSO KNOWN AS
"MR. FUCK".
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
IN THE LAST FILE, YOU WERE SHOWN HOW TO MAKE THE BLACK BOX, BUD BOX, AND THE
SCARLET BOX. HERE ARE SOME MORE BOXES YOU CAN MAKE TO RIP OF THE FONE CO.
GOLD BOX
=------=
YOU WILL NEED THE FOLLOWING MATERIALS: (2) 10K OHM AND (3) 1.4K OHM RESISTORS,
(2) 2N3904 TRANSISTORS, (2) PHOTOCELLS, (2) RED LEDS, A BOX THAT WILL NOT LET
LIGHT IN, AND RED AND GREEN WIRE.
LIGHT FROM THE #1 LED MUST SHINE DIRECTLY ON THE PHOTOCELL #1. HERE IS THE
SCHEMATIC FOR THE GOLD BOX:
1
:-PHOTOCELL--:
: :
: :BASE
: 1 TTTTT
: +LED- TRANSISTOR
: TTTTT
: : :
: -I(-- : :COLLECTOR
RED1--< >:--: :-------:-----GREEN2
-I(-- : ----------:
: :
2 :-/+/+/-/+/+/-/+/+/-/+/+/
LED 10K 10K 1.4K 1.4K
RESISTORS
2
-PHOTOCELL-----------------
: :
:BASE :
TTTTT :
TRANSISTOR :
TTTTT :
: :EMITTER :
GREEN1- --------------------------RED2
: :
/+/+/
1.4K
THE 1.4K RESISTOR IS VARIABLE AND IF THE SECOND PART OF THE GOLD BOX IS
SKIPPED IT WILL STILL WORK, BUT WHEN SOMEONE PICKS UP THE PHONE THEY WILL HEAR
A FAINT DIAL TONE IN THE BACKGROUND AND MIGHT REPORT IT TO THE FONE CO. 1.4K
WILL GIVE YOU GOOD RECEPTION WITH LITTLE RISK OF A BELL AGENT AT YOUR DOOR.
NOW THAT YOU HAVE BUILT THE GOLD BOX, TAKE TWO GREEN WIRES OF THE SAME LENGTH,
AND STRIP THE ENDS. TWIST TWO ENDS TOGETHER AND CONNECT THEM TO GREEN1 AND
PLACE A PIECE OF TAPE ON IT WITH LINE #1 RIDING ON IT. CONTINUE THE PROCESS
WITH THE RED1, ONLY USE RED WIRE. REPEAT WITH GREEN2 AND RED2, BUT CONNECT
IT TO LINE #2.
TO INSTALL YOUR NEW FOUND FRIEND, YOU WILL NEED TO FIND TWO PHONE LINES THAT
ARE CLOSE TOGETHER. LABEL ONE OF THE PHONE LINES LINE #1. CUT THE PHONE LINES
AND TAKE OUT THE OUTER COUTING OFF IT. THERE SHOULD BE 4 WIRES. CUT THE YELLOW
AND BLACK WIRES OFF AND STRIP THE RED AND GREEN WIRES FOR BOTH FONE LINES.
LINE #1 SHOULD BE IN TWO PIECES. TAKE THE GREEN WIRE OFF ONE END AND CONNECT
IT TO THE ONE ONE THE GOLD BOX. TAKE THE OTHER HALF OF LINE #1 AND HOOK THE
FREE GREEN WIRE TO THE GREEN WIRE ON THE FONE LINE. REPEAT THE PROCESS WITH
RED1 AND THE OTHER LINE.
ALL YOU NEED TO DO NOW IS GO HOME AND PHONE THE HOUSE YOU PUT THE GOLD BOX ON.
YOU SHOULD GET A DIAL TONE! YOU HAVE SEIZED THEIR LINE FROM A REMOTE LOCATION.
IT IS IMPOSSIBLE FOR BELL TO TRACE YOU. THEY WILL TRACE THE PEOPLE WHO'S FONE
YOU ARE USING!
SILVER BOX
=--------=
YOU WILL NEED THE FOLLOWING MATERIALS:
(1) BLUE WIRE ABOUT 1 FOOT
(1) GRAY WIRE ABOUT 1 FOOT
(1) BROWN WIRE ABOUT 1 FOOT
(1) SPDT SWITCH (SMALLER THE BETTER)
(1) STANDARD BELL FONE (YUCK!)
(1) SOLDERING IRON AND SOLDER
(1) FLAT TIP SCREWDRIVER
HERE IS WHAT TO DO...
1 - TAKE THE CASING OFF YOUR PHONE BY LOOSENING THE TWO SCREWS UNDER IT. DON'T
REMOVE THEM FULLY.
2 - LOOSEN THE SCREWS ON THE SIDE OF THE TOUCH TONE KEYPAD. CAREFULLY REMOVE
THE TOUCH TONE PAD FROM THE MOUNTING BRACKET.
3 - YOU WILL NOTICE A PLASTIC COVER ON THE PAD. SEPERATE THE TWO HALVES AND
GET THEM OUT OF YOUR WAY, BUT DON'T DESTROY THEM, YOU WILL NEED THEM LATER.
4 - NOW LOOK AT THE TOP OF THE PAD SO THE 123 ROW IS FACING AWAY AND THE *0#
ROW IS TOWARD YOU. TURN OVER THE KEYPAD. YOU SHOULD SEE A MASS OF WIRES, GOLD
PLATED CONTACTS, DISCRETE COMPONENTS, AND TWO LARGE DOUGHNUT SHAPED BLACK
THINGIES. THESE ARE THE COILS THAT MAKE THE TOUCH TONE FREQUENCIES. ALL YOU
ARE GOING TO DO IS CONNECT WIRES THAT MA BELL "FORGOT" TO DO. (HEH HEH).
5 - LOOK AT THE COIL ON THE LEFT (WITH FIVE SOLDER CONTACTS FACING YOU, RATHER
THEN BEING PERPENDICULAR TO YOU). COUNT OVER 4 CONTACTS FROM THE LEFT (OR TWO
CONTACTS FROM THE RIGHT) AND SOLDER THE GRAY WIRE TO THE FOURTH POST ON THE
LEFT.
6 - SOLDER THE OTHER END OF THE GRAY WIRE TO THE LEFT POLE OF THE SPDT SWITCH.
7 - TAKE A LOOK AT THE BOTTOM EDGE OF THE PAD. YOU SHOULD SEE A ROW OF THREE
GOLD PLATED CONTACTS. LOOK AT THE ONE ON THE LEF4AND GENTLY SEPDRATE THE TWO
TOUAHINE CNNNECTORS ADD STTHEM APART.
8 - SOLDER THE BROWN WIRE TO THE TOP CONTACT, AND SOLDER IT TO THE RIGHT POLE
OF THE SPDT SWITCH.
9 - NOW TAKE THE BLUE WIRE AND SOLDER IT TO THE BOTTOM CONTACT. SOLDER THE
OTHER END OF THIS WIRE TO THE CENTER POLE OF THE SPDT SWITCH.
10 - NOW PUT THE PHONE BACK TOGETHER, TIGHTENING THE SCREWS THAT YOU LOOSENED.
NOW (FINALLY) WHEN YOU HAVE THE SWITCH IN THE ON POSITION YOU WILL HAVE A
NORMAL FONE, AND WHEN YOU HAVE IT IN THE OFF POSITION, THE 3, 6, 9, AND # KEYS
, WHICH ARE NOW A, B, C, AND D KEYS, WILL PRODUCE THE SILVER BOX TONES!
PURPLE BOX
=--------=
MATERIALS YOU WILL NEED:
(1) SPDT SWITCH
(1) BLUE WIRE
(1) SOLDERING IRON
THIS IS AN EASY BOX. THIS MAKES A FAKE CALL FORWARDING SERVICE WITHOUT PAYING
FOR IT.
1 - TAKE YOUR FONE APART.
2 - LOOK FOR THE RED WIRE LEADING FROM THE CIRCUIT BOARD.
3 - SOLDER THE BLUE WIRE TO THE CENTER POLE OF THE SPDT SWITCH.
4 - NOW CONNECT THE SWITCH (WITH THE WIRE) TO THE RED WIRE (AFTER YOU HAVE
SPLICED IT!).
NOW WHEN YOU HAVE THE SWITCH IN THE ON POSITION AND YOU ARE TALKING TO SOMEONE
BUT YOU ARE EXPECTING AN IMPORTANT CALL, YOU CAN STILL TALK BECAUSE IF YOU
GET A CALL WHILE YOU ARE TALKING, THE LINE WILL GO FUZZY. FLICK THE SWITCH AND
YOU CAN TALK TO THE OTHER PERSON, BUT YOU WILL HANG UP ON THE OTHER PERSON.
OH WELL, LIFE IS A BITCH!
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
WELL, THAT IS IT FOR THIS FILE. MAYBE I WILL WORK ON #3 SOMETIME. ANYWAYS, I
HOPE THIS HELPS YOU FUCK A FEW PEOPLE AND HELP YOURSELF.
% THE LOCKSMITH %
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.
totse.com certificate signatures
|
|
|
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
|
|
|
|
|
|
