NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
How to build a 3-way phone
Step By Step:
1] You will need two different lines for this. Okay first take
off both of the boxes covering the wires
2] Take the green and red from each box and attach a wire to
each of these one wire to green 1 wire to red same on the other
box
3] After you have 4 wires (2 For each box) then get a two way
switch with two terminals then hook the two green wires to
one side and the red wire to the other side then when you
switch the switch you should here a dial tone and then just
dial out and you will be able to talk to two people at one
time
To the best of our knowledge, the text on this page may be freely reproduced and distributed. If you have any questions about this, please check out our Copyright Policy.