|
Realistic Pro- 34 Mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
pro34.14
Date: 4 Apr 89 14:24:01 GMT
Subject: PRO-34 Scanner Modifications
In the May 1989 edition of Popular Communications is a
"Letter to the Editor" on the Radio Shack PRO-34 Scanner. Below
is the text of that letter.
PRO-34 Scanner Modification
In regard to the information presented (March Issue) on the
handheld Radio Shack PRO-34 scanner, my own observations on the
modifications have been:
1. To restore missing 800 MHz frequencies, remove D-11.
2. To add 66 to 88 MHz (European Coverage), install a diode at
D-9.
3. D-10 must remain in place for full 800 MHz coverage.
4. If a diode is added at D-13 it cuts out aero band, also seems
to affect 800 MHz channel spacing.
5. D-12 added dosen't seem to have any affect.
6. Only D-10 and D-11 are factory installed.
I wish to thank you for a fine and informative magazine. I
have had much reading enjoyment.
Sam S. Jones,
Rebel Antenna,
Falls Church, VA
--
Julian Macassey, n6are julian@bongo ucla-an!denwa!bongo!julian
n6are@wb6ymh (Packet Radio) n6are.ampr.org [44.16.0.81] voice (213) 653-4495
|
|
