|
Kenwood TS- 440 Computer Interfacing
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
IC10.3
Down
____
DN;
The Frequency or Memory Channel
Will Decrement One Step
Frequency VFO A / VFO B Request
_______________________________
FA;
FB;
The Frequency in the Selected VFO Will be Read
The Frequency Will be Sent in the Form:
FAggmmmkkkhhh; or
FBggmmmkkkhhh;
Where gg = GHz. Value
mmm = MHz. Value
kkk = kHz. Value
hhh = Hz. Value
Frequency VFO A / VFO B Select
______________________________
FAggmmmkkkhhh;
FBggmmmkkkhhh;
The VFO Selected Will be Set to the Frequency Defined
Where gg = GHz. Value (May be sent As 00 or Spaces)
mmm = MHz. Value
kkk = kHz. Value
hhh = Hz. Value
Function Select
_______________
FNn;
The Function Defined Will be Selected
Where n = 0 for VFO A
1 for VFO B
2 for MEMORY
Identify Model Request
______________________
ID;
The Model of the Radio Will be sent in the Form :
ID00n;
Where : n = 1 for a TS-940 (*)
n = 2 for a TS-811 (*)
n = 3 for a TS-711 (*)
n = 4 for a TS-440
Read Information Request
________________________
IF;
The Status Information Will be Sent in the Form :
IFggmmmkkkhhh snnnzrx yytdfcp
Where gg~~hhh = Value as defined in FA Command
s = "+" or "-" Value of RIT/XIT
nnn = Value of RIT/XIT (n.nn kHz.)
z = "0" (Not Used in TS-440)
r = Value as defined in RT Command
x = Value as defined in XT Command
yy = Memory Channel No.
t = 0 for Receive
1 for Transmit
d = Value as defined in MD Command
f = Value as defined in FN Command
c = Value as defined in SC Command
p = Value as defined in SP Command
CONTINUED IN IC10.4
|
|
