|
Yaesu FT- 747GX general coverage mod
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
-------------------------------------------------------------------------------
GENERAL COVERAGE MOD FOR YAESU FT-747GX
-------------------------------------------------------------------------------
1.) Remove top cover.
2.) On backside of display unit there is a brown jumper wire near the large
ribbon cable.
3.) Cut this jumper.
4.) Turn radio on and set display for 12.345.6 then turn radio off then on.
5.) This enables the general coverage mode and a GEN display will come on
and stay on at the top of the LCD display.
6.) Reassemble the unit. It will now transmit everywhere it receives,
however Yaesu recommends that it only transmit from 1.8 - 30 MHz.
RELAYED BY...N0KGX...GENE
|
|