|
Mod For Yaesu Ft- 470 Handheld
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
FT470.3
===============
WARNING!: FT470 shuts down and display goes blank when
supply voltage drops to about 4.8 volts. BUT DRAIN CONTINUES
AT ABOUT 10 ma. So, there is a danger of over-discharging
nicads. Shut your equipment off to prevent this.
from WA2NQL
TO ENABLE THE FT-470 TO RECEIVE (ONLY) OUT OF BAND ON VHF AND UHF:
1. Turn radio off.
2. Press and hold both UP and DOWN arrow keys, while turning radio back on.
3. That's all there is to it!
4. To restore to normal follow the procedure in the manual for resetting
the CPU.
NOTE: The extended coverage on vhf was apparent but was unable to see any
change in the UHF portion.
If anyone can figure out why not ... please let me know.
Downloaded From P-80 International Information Systems 304-744-2253
|
|