|
Modification for Yaesu FT- 411 Handheld
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
FT411.4
COMMENTS
--------
1) After the rig was programmed to the band and you want to change it
to other ranges you will have to open the rig again and disconnect
Jumper No 3 then to apply power to the radio ,turn it on again
open it again ,connect Jumper No 3 back and repeat from steps 5 .
Subject: FT-411 OUT OF BAND MODIFICATION
Date: 05 Feb 89
I discovered a nice trick to increase its frequency coverage.
It is so simple that you don't even have to open your hand held.
All you have to do is:
1. Make sure that the power switch is off.
2. press the UP arrow and DOWN arrow together, at the same time
(those keys are also called A, and B.
and they placed at the upper right side of the keyped)
3. Keep pressing both buttons and turn the power on.
Now you can receive 130-174Mhz, and transmit 140-150Mhz
CAUTON: When you do this modification the memories can be erased.
Ayhow I think it is not the end, and there are some more options.
If you do have some more information about this Hand held,
Please leave me a msg with it.
Tnx, AVIAD, 4X6TL@4Z4SV
CONTINUED IN FILE FT411.1
Downloaded From P-80 International Information Systems 304-744-2253
|
|
