|
Modification for Yaesu FT- 411 Handheld
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
FT411.2
BID: 6495_NO8M
From: N8LKT@NO8M
Subject: FT 411 TO PACKET
FOR THOSE THAT WISH TO CONNECT A FT 411 TO PACKET VIA A MFJ TNC THE
FOLLOWING MODIFICATIONS ARE NEEDED. IN THE BLACK LEAD FROM THE TX AUDIO
OUT INSERT A .01-0.1UF CAP. IN THE RED LEAD FROM THE PTT, INSERT A 2.2K RST.
THEN COMBINE THESE INTO A COMMON SINGLE LEAD CONNECTED TO THE TIP OF THE
SMALL MIKE PLUG. THE YELLOW RX AUDIO GOES TO THE TIP OF THE LARGE SPEAKER
PLUG. AND THE SHIELD GOES TO THE RING OF THE LARGE PLUG. THIS INFORMATION
CAN BE FOUND IN THE 1989 AUGUST ISSUE OF 73. PAGE 58
IT WORKES FOR ME .73'S [email protected]
RELAYED BY..N0KGX...GENE
|
|