|
Alinco DR- 570T mods
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
DR570T
MODS FOR OUT OF BAND ENABLE JUST PULL OFF THE TOP COVER, PLACE THE RADIO
WITH THE KNOBS FACING AWAY FROM YOU. LOCATETHE LOGIC BOARD BEHIND THE
FRONT PANEL. TOWARDS THE TOP MIDDLE OF LOGIC BOARD (IN THE UNSHEILDED AREA)
ARE THREE WHITE COLOR JUMPERS, THE ONE ON THE LEFT TILTS ABOUT 45 DEGREES .
YOU WANT TO CUT THE LAST JUMPER ON THE RIGHT (ABOUT MID-FRONT PANEL).
REPLACE THE COVER . TURN ON THE RADIO WITH THE FUNCTION KEY DEPRESSED.
THE RIG WILL KNOW HAVE TO BE RE-PROGRAMMED. FREQ. RANGE 130-170MHZ,
420-470MHZ, RX ONLY 335-385MHZ, 850-890MHZ
|
|