|
Modifying a Bearcat 760XLT to monitor cellular cal
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
Date: WEDNESDAY 02/15/89 08:49:47 EDT
From: (ARPAnet Address Deleted)
Subject: 760XLT MODS
To: (ARPAnet Address Deleted)
Netlanders:
Concerning the Uniden Bearcat 760xlt, the mod for the 950xlt does work
to restore lost freq. Disconnect pin 20 of the microprocessor from the
circuit board and connect it to pin 19. I bent the pin slightly and cut
it with the scissors of a swiss army knife then soldered an 1/8 lead
cut from a cap across the pins near the top of the chip. I've yet to
find any problem with this mod. But as always do so at your own risk.
73 (Packet Radio Address Deleted)
|
|
