|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
|
Cable hacking
CABLE TV SCRAMBLING TECHNIQUES by The Mad Phone-man
-----------------------------------------------------------------------------
There are 4 major methods of pay-channel security and each has different
consequences for cable ready receivers. The 4 systems are jamming, trapping
out-of-band scrambling and in-band scrambling.
Jamming:
A jamming signal is placed between the picture carrier and and the aural
carrier of the secured channels. The cable operator supplies a filter for each
customer for each paid channel. This type of security is easily defeated by
homemade notch filters.
Trapping:
In these systems frequency filters are installed in line with the cable drops
on telephone poles. The traps are removed for customers paying for the premium
channels. Cable-ready TV's work fine in these systems.
Scrambling - The gated Sync Methods:
Scrambling in the cable TV business still generaly means pulsed sync
suppression. In its simplist form, amplitude of the picture carrier is reduced
by 6 db during the horizontal blanking intervals and sometimes during the
vertical blanking intervals. The resulting video signal has sync tips between
the black and white levels. Sync seperators in the set cannot operate properly
with this signal, nor can AGC and color circuts, so the picture is scrambled.
The decoder compensates by antennuating the signal during the time in which the
transmited signal was not antennuated. In order to accomplish this, the logic
controlled gain switch must get timing information. In-band systems transmit
pulses as amplitude modulation of aural carrier or a seperate carrier in out of
band systems.
Out of band scrambling:
The usual setup is that the decoder is connected directly to the cable
ahead of the channel converter. Decoding is done at the pay channel frequency.
The decoder is likely to be in a seperate box, added to an old system to provide
pay channels. The box consists of a simple receiver (90-120mhz) for the
out-of-band data carrier and a broad band 6db gain switch. There is provision
for several scrambled channels, each which has a different data carrier.
This system is directly compatable with cable ready receivers. Without the cable
converter, the decoder is connected to the TV. Tuning and remote features of the
TV are preserved with the only inconvience being the need to operate the switch
on the decoder when changing to and from any scrambled channel. Out-of-band
systems tend to last until the operators using them rebuild to provide for a
large increase in the number of channels.
In Band Scrambling:
In this system any number of the available channels can be scrambled.
Because the data carrier for each scrambled channel is its own aural carrier,
only one data receiver, at the aural carrier frequency (eg. ch 3) is required.
The decoder detects the presence or absense of data automaticly switching itself
in or out. The converter-decoder box can be hardwired to decode just the
channels ordered, using a prom like device. Alternatively, the transmitted
channels can be "tagged" by time division multiplexing binary tag (program
identification) data with the sync data on the aural carrier. The decoder boxes
can be wired for "tiers" (groups of programs the cable operator sells together)
rather than fixed channels, giving the operator more flexibility.
The decoder boxes can be "addressable". These boxes have a seperate out of band
data channel for data from the head end. Each box has a serial number burned
into its logic or otherwise available to its logic circutry, and its channel or
tier authorization stored in volatile ram. A computer at the headend periodicaly
addresses all decoders in the system individualy and loads each with the channel
or tier capacity ordered by the customer. The need for house calls is reduced,
PPV (Pay per view) is possible, and missing boxes cam be turned off, rendering
them useless for premium channel viewing. Some but not all of these features can
be programmed into out-of-band systems.
Aside form their ability to generate sync pulses, thus foiling the scrambling
system, cable ready TV's have presented another difficult problem for in-band
systems. Because the decoder operates at the converted channel, a channel
converter is required ahead of it. Whether the TV receiver is cable-ready or
not, it operates only at the converted channel, wasting the tuning and remote
control features.
Mad Phone-man Productions © 1988
Permisiion Granted to reproduce this article in its entireity
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.
totse.com certificate signatures
|
|
|
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
|
|
|
|
|
|
