|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
|
Pannisonic programming codes
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
? *?Programming the EF?6106 Panasonic Cellular Phone?
1) Power on Unit
2) Enter [*] 0 0 0 0 [#] Wait 2 seconds
3) Enter [*] 1 [SEND] Wait 2 seconds
4) Enter 50 [SEND] Wait 2 seconds
5) System Id (SIDH) _ _ _ _ [STO] 01
6) Mobile Id (MIN) (_ _ _) _ _ _ ? _ _ _ _ [STO] 02
7) Lock Code _ _ _ _ [STO] 03
8) Speed Dial (00) (_ _ _) _ _ _ ? _ _ _ _ [STO] 04
9) Station CL. Mark 0 0 [STO] 05
10) Init. Page (1PCH) 3 3 3 (or 334 for W/L) [STO] 06
11) Acc. Overload 0 5 [STO] 07
12) Group Id. (GIM) 1 2 [STO] 08
13) [STO] 09
1 Local Use
1 Min MArk
1 Pref. System (1= N?W/L and 0= W/L)
1 End to End
1 Repert. Dial
1 Horn Alert **
0 Not Used
0 Not Used
14) [STO] 10
0 Not USed
0 Monitor Mode
0 Auto Lock
0 Not Used
0 Not USed
1 A/B System Sel. (1=N?W/L and 0= W/L)
0 Pref. Sys. Only
0 Home Sys. Only
15) [STO] 11
1 Call in Absence
1 DTMF
0 Not Used
0 Not Used
0 Not Used
0 Not Used
1 Tot. Call Timer
1 Ind. Call Timer
16) [Missing from my sheet]
17) Program Recall ? [RCL] Memory Location
18) Burning the NAM ? [STO] * *
To restart normal operations turn the power off, then back on.?j ? Make a test call. If a probl occurs enter the password and
check your programming.
NOTE1: In order to program the phone ONLY THE FOLLOWING
CONNECTIONS CAN BE MADE TO THE PHONE. On a 2pin (RS?232 type)
female connector have 12 volts positive to pins 11,12, and 13;
and negative to pis3, 24, and 25. Otherwise the phone will
ignore the password sequence and not enter program mode.
NOTE2: I am told by someone who opened up their phone that the
NAM is an EEPROM, ie it can be reprogmmed over and over again.
(Unlike some phones such as one model by Motorola which can only
be progrmed three time and then the NAM has to be switched.
NOTE3: It is advisable to first recall and write down all program
memory locations by pressing [RCL]nd 01 through 11. This will
allow you to go back if your new number does not work. Ordinarily
you wl only have to change 01 , 02 and the Pref. System and A/B
System Sel. if you have switched from a irline or a Non?Wireline Carrier or vice?versa.
NOTE4:H A C K I N G
Limited experimentation has been done with this information. One
test that has succeeded was to progm a number as yet unassigned
by a carrier and try it in a ROAM mode elsewhere. This worked
completeyand lends credence to the theory that the Nationwide
database of ESN's is not yet activated. Unles yur ESN is in the
local system, the default is that you can roam with a valid
mobile number until he ocal system is programmed to lock you
out. This seemed to work even when a known stolen and therforesupposedly locked out mobile number was used in ROAM on a foreign
system.X-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.
totse.com certificate signatures
|
|
|
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
|
|
|
|
|
|
