NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
Reprogramming the OKI Model # 900
USED PHONES: TO DISPLAY CURRENT UNLOCK CODE
-- THIS FUNCTION IS PROVIDED FOR IN THE PROGRAMMING SEQUENCE
Power up unit
Press RCL and MENU simultaneously
Enter 10 digit Security Code as follows: *12345678#
What follows can be done only once!
The display "Enter NEW PW-Sto"
Enter 0123456789 then press STORE.
The display "Re-Enter New PW-Sto"
Enter 0123456789 then press STORE to enter Programming Mode
IF you don't wish to keep the new password, then power unit down.
ACTION ENTER DISPLAY
-!---- ----- -------
# Software Version & ESN
in HEX. Clears in 2 sec.
Sped Dial Memory Clear
Press * STO SPD DIAL MEM CLEAR
Press * STO DEFAULT DATA CLEAR
NAM 1 Mode
Own #111 111-1111
XXX XXX XXXX STO + Vol Up MIN
123456 STO + Vol Up SECURITY
-!--- STO + Vol Up SYSTEM ID:
0334 STO + Vol Up IPCH
07 STO + Vol Up ACCOLC #
15 STO + Vol Up GROUP ID
1234 STO + Vol Up UNLOCK CODE
1010 STO + Vol Up STATION CLASS
1110 STO + Vol Up OPTION
At this time you may exit the programming mode by pressing CLR to bypass
the other NAM modules. -- Captain Midnight
V??R??T
To the best of our knowledge, the text on this page may be freely reproduced and distributed. If you have any questions about this, please check out our Copyright Policy.