|
|
 |
|
|
|
register |
bbs |
search |
rss |
faq |
about
|
|
|
meet up |
add to del.icio.us |
digg it
|
|
|
|
DDI is inofomation on Digital Data Interpreter Tes
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
DIGITAL DATA INTERPRETER TEST SET
The Digital Data Interpreter (DDI) decodes digital computer transmissions
encoded on an audio signal and interprets the digital data as cellular
commands. The input to the DDI is an audio signal like that from a radio.
The output from the DDI is plain text over a standard serial data stream
at 9600 baud. The DDI will work with a PC, simple dumb terminal, or will
communicate directly to some radios.
EXAMPLES:
CONTROL VOICE
?????????????????????????????? ??????????????????????????????
? NAC=15 ? ? Ring Phone ?
? 555-4540 (312) Registration? ? Stop Ringing ?
? 555-4540 (312) GoTo 869.880? ? Disconnect ?
? 555-4540 (312) GoTo 869.880? ? ?
? 555-3238 (312) Paging ? ? Ring Phone ?
? 555-0186 (312) Paging ? ? Change Power to .25 W ?
? 555-8252 (312) Paging ? ? Change Power to 1.6 W ?
? 555-0186 (312) GoTo 891.090? ? GoTo 890.220 ?
? 555-0186 (312) GoTo 891.090? ? ?
? ? ? ?
?????????????????????????????? ??????????????????????????????
The left display shows a control message came in indicating the number of
access channels in the system is 15. The GoTo command shows a request for
312-555-4540 to switch to voice channel 869.880. The interaction
following on the voice channel, might be like that in the right box. This
example shows the system is paging three people. Upon answering a page
the respondent would be asked to GoTo a voice channel as is shown with
312-555-0186. The above display has a number of filter options selected
to avoid numerous more mundane commands.
The right display shows the system requesting a phone to ring, then to
stop ringing and to disconnect. Another session follows showing the
person in fact answered and is engaged in conversation. During the
conversation the system requests the phone to change the power level
twice. Eventually the voice channel is changed to 890.220 as the mobile
moves into another cell. Once again this display had some filtering
options selected to reduce the types of commands displayed.
DDI SPECIFICATIONS
The DDI requires audio input (3.55mm jack) from a radio or other source
of audio containing digital data.
The serial output will connect to any standard RS-232 device. The DDI
transmits on pin 2 of a 9 pin male jack. The output from the DDI is plain
text.
The DDI requires 12 VDC at 250ma using a 3.55mm jack (tip +).
Many radios however do not provide a good signal from the speaker. For
these radios a connection may be required inside the radio.
In some cases a part change is also required to slightly increase the NFM
bandwidth. As an alternative for better quality and for radios where a
part change is not possible CCS offers a small unit to fit into the radio
to provide a good signal for the DDI without interfering with the radio.
Three wires need to be soldered and the jack on the unit usually can be
mounted in the rear of the radio.
CCS can provide connection information for many radios.
Ask for specific information and prices for your radio.
SOFTWARE
When the DDI is connected to a PC, standard communications software (like
PROCOMM) may be used with the DDI. The DDI comes with software for a PC
that may be used to perform advanced tasks. For example, it can be used
to wait for only specific commands or phone numbers and take an action on
those commands. The PC can be configured to keep a log of specific
events. A radio that is controlled over a serial link may be connected
to the PC and the software will issue frequency change commands to the
radio. A level converter and squelch detect for the ICOM radios is built
into the DDI. Only one serial port is required for both the DDI and the
ICOM radio. The following is a list of key software features:
Two column display to maximize the data displayed.
Select desired commands and numbers for display and logging
separately.
Select criteria for following frequency changes.
Scans channels based on user criteria.
Automatically tunes and analyses data quality on each control
channel.
Presents detailed information on cellular system parameters.
General purpose scanning module included for non-cellular use.
ORDERING INFORMATION
DDI PACKAGES
The DDI Kit of parts comes with a PCB and all PCB parts. A case, cables
and AC adaptor are not included. The kit includes surface mount parts
that must be soldered.
The DDI subassembly is an assembled PCB. This PCB may be used in a
customers custom test equipment.
The DDI commercial test equipment set is an assembled DDI installed in a
case with an AC adaptor and a 9 pin serial cable for a PC.
All three packages include the CCS IBM compatible PC software.
CONNECTION KITS
Kits are available with instructions and parts for connecting the DDI to
some radios. Soldering is required and prices vary from $8 to $18
depending on the radio. A generic kit is available that will work with
almost any radio but will require a review of the radio schematic. CCS
will quickly respond to your questions about interfacing to the DDI before
and after a purchase. Ask for a quote if you would like CCS to modify
your radio.
RETURN POLICY
The assembled DDI may be returned within 14 days for a refund (minus S&H).
=======================================================================
ORDER FORM
DDI Kit of parts $295
PCB Subassembly $305 Name:________________________
Complete Commercial
Test Equipment Set $330 ________ Address:_____________________
AR-3000(A) Kit $18 City/State/Zip:______________
PRO-200x Kit $18
AR-2500 Kit $8 MAIL ORDER TO:
R7000/R7100 Kit $8
Generic Kit $18 ________ CCS
P.O. Box 11191
Shipping & Handling (USA) Milwaukee, WI 53211
UPS $10, UPS BLUE $15
UPS RED $25.
Add $5 for COD ________
Discounts: Wisconsin residents
Subtract $20 for each add 5% or 5.5% sales
DDI purchased after tax.
the first DDI. ________
TOTAL ________
=======================================================================
|
|
|
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.
totse.com certificate signatures
|
|
|
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
|
|
|
|
|
|
|
TSHIRT HELL T-SHIRTS
|
