About
Community
Bad Ideas
Guns & Weapons
Irresponsible Activities
KA-FUCKING-BOOM!
Locks and Security
Scams and Rip-offs
Drugs
Ego
Erotica
Fringe
Society
Technology
register | bbs | search | rss | faq | about
meet up | add to del.icio.us | digg it

Hexamethylenetetramine Dinitrate


NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.

Hexamethylenetetramine Dinitrate (with HNO3, much better yield)

You will need:

14g of hexamethylenetetramine,
20mL of 70% nitric acid,
Distilled water,
Three 150mL beakers,
A thermometer,
A filter funnel,
Filter papers,
An ice bath,
A fridge,
Acetone.

1) Dissolve the hexamethylenetetramine in 100mL of water in one of the beakers (it will help if you heat it up, to around 80*C). Put it into the fridge after it's all dissolved, and cool it to around 5*C.

2) Measure out the nitric acid into another 150mL beaker.

3) Slowly, while stirring with the thermometer and keeping the temperature below 5*C (with the ice bath), add the nitric acid to the hexamethylenetetramine solution.

4) After the nitric acid has been added, cool the solution to 0*C.

5) Filter out the precipitate, and add it to 100mL of acetone in the third 150mL beaker.

6) Use the thermometer to crush it up and stir it around under the acetone.

7) Filter out the solid, and leave it to dry. Protect it from moisture.

Using the 70% HNO3 method, it worked very well, good yields of course. It isn't VERY powerful, with a V.O.D between 6000-7000 m/s, but thats not bad considering how easy it is to make. The major problem i have with this exploaive is that it is very hogroscopic, not as bad as ammonium nitrate, but if you leave it out overnight, it will be pretty wet the next day. So you will have to dry it in the oven, on low, about 60*C

 
To the best of our knowledge, the text on this page may be freely reproduced and distributed.
If you have any questions about this, please check out our Copyright Policy.

 

totse.com certificate signatures
 
 
About | Advertise | Bad Ideas | Community | Contact Us | Copyright Policy | Drugs | Ego | Erotica
FAQ | Fringe | Link to totse.com | Search | Society | Submissions | Technology
Hot Topics
Plausible mixture, need expertise
i wanna make a bottle rocket
PVC end cap failiure.
Detonation by fire?
would this work???
so I've been googling around but:
Books
SHOOTER MOVIE ((Hollywood vs. Reality))
 
Sponsored Links
 
Ads presented by the
AdBrite Ad Network

 

TSHIRT HELL T-SHIRTS