|
Raging Rockets
by Ryan
NOTICE: TO ALL CONCERNED Certain text files and messages contained on this site deal with activities and devices which would be in violation of various Federal, State, and local laws if actually carried out or constructed. The webmasters of this site do not advocate the breaking of any law. Our text files and message bases are for informational purposes only. We recommend that you contact your local law enforcement officials before undertaking any project based upon any information obtained from this or any other web site. We do not guarantee that any of the information contained on this system is correct, workable, or factual. We are not responsible for, nor do we assume any liability for, damages resulting from the use of any information on this site.
You know those rocket engines that you use in those model rocket kits? Wanna have some fun with them? This is what you do. First take knife and carve out the end with the hole in it until you reach the black powder. After that if you have a wick (green ones work best) shove it into the hole the tape it up so only the wick is sticking out. Next light the thing and run! The rocket can either explode, fly into the air, spiral on the ground like a ground hog or fly crazily, so watch out. THese things have a lot of power and heat, when they light they can explode into a cloud of fire and smoke so back up. If you don't have any wicks you can cut a slit into the carborad covering and tear of the covering. Then when you get to the black stick put it in something rap it with tape with the end sticking out and light the end without the hole. On some of them i found that theres a sort of wick amd if you hold a lighter (you might want to tweeke it up) it will shoot a flame out and then the rocket will ignite a few seconds later. The engines could become flash bangs, ground hogs, or shooting rockets so be ready for anything. I would recomend buying the C6-5s becasue they have the most black powder in them.
|
|
